Concrete cutting may seem easy; however, the process itself has its own difficulties due to the need for precise and safe cuts. For an effective and efficient cut, it is essential to know a few things.
It doesn’t matter if you need to remodel a concrete structure or remove it, a concrete cut is inevitable. This process consists of drilling, sawing and removal of concrete. A job that you should not do just because it can cause unexpected additional problems.
Today, you can find so many different types and sizes of concrete saws and blades. Whether you’re buying a new saw or just renting it, the success of the project depends on selecting the right saw for the job. Different materials require different depths of saws and blades. For example, wet saws are most often used to reduce dust while cutting. Ideal for smooth and small cuts. Concrete saws with diamond blades are considered like most professional saws, providing clean, sharp cuts in minimal time. They are also used in decorative concrete projects. For massive projects, hand saws are perfect. On the other hand, a handsaw is used to create professional corner cuts and flush cuts.
The depth of cut also affects the correct type of saw. Any surface deeper than 4 inches will easily be cut with a hand saw. Obviously, a greater depth of cut means a greater density of cut. Surface more than 6 inches deep requires hiring concrete cutting professionals to do the job safely and efficiently.
A single project cannot be completed with a single saw. Usually several different saws are required to complete the job. Instead of buying more saws, the best option is to hire someone who has a good collection of saws and blades. Always check the equipment before starting work. The blades have to be in their best condition. They must not be damaged because they can be dangerous for the life of the worker. Replace them immediately. Without forgetting the fact that the blades must be sharp. Otherwise, the cut will take a long time and be less effective.
Have you thought that the concrete cutting process has its own perfect time to do it? To create precise cuts, you need to wait for the perfect moment to cut: when the concrete is not wet and not fully set.
You should look for a professional who offers concrete cutting and drilling services with more than 20 years of experience in your region. They will take your project to the end.
